AEROTHERMAL HEAT PUMP
2WATER TECHNOLOGY
technical service
Locate your nearest technician
activate your warranty
Fill in the activation form
AEROTHERMAL HEAT PUMP
2WATER TECHNOLOGY
technical service
Locate your nearest technician
activate your warranty
Fill in the activation form
AQ-TD is a system based on the operation of the heat pump with solar gain that is characterised by the incorporation of a thermodynamic panel, which generates an increase in performance thanks to the use of incident solar radiation, as well as the energy contained in the environment.
Domestic Hot Water 24 hours a day
Maximum temperature up to 60ºC
Silent equipment thanks to its design
AQ-TD is a system based on the operation of the heat pump with solar gain that is characterised by the incorporation of a thermodynamic panel, which generates an increase in performance thanks to the use of incident solar radiation, as well as the energy contained in the environment.
Domestic Hot Water 24 hours a day
Maximum temperature up to 60ºC
Silent equipment thanks to its design
System that improves the energy efficiency of the home, with a tank made of stainless steel, advanced control, thick insulation that reduces noise
It avoids corrosion of the equipment and ensures maximum protection of the tank, extending its useful life for much longer.
Ideal for installation in newly built homes or renovation of more traditional systems such as electric water heaters or gas boilers.
You can make your equipment even more efficient by adding a double coil or photovoltaic connection to the tank.
Unlike photovoltaic or traditional solar thermal panels, thermodynamic panels do not need to be placed in full sunlight. They absorb heat from direct sunlight, but it can also extract heat from the ambient air during the night.
The aluminium roll-bond panel weighs 6.2 kg, making it a very light panel that can be placed almost anywhere.
Operates without direct solar radiation
Lifetime of the panel is more than 25 years
The panel can be installed horizontally or vertically
Certified:
Solar Keymark
AQ-TD is a silent thermodynamic system, with an elegant design that can be fully integrated in kitchens, garages, bathrooms, etc. Ideal for installation at home, but also for housing development areas, hotels, gyms, residences, schools, etc. It is possible to obtain hot water both day and night, even when the weather conditions are very adverse, such as: rain, cloudiness, wind, snow and even if snow covers the panels. This is because the snow makes the “igloo effect” and keeps the temperature of the panels at 0ºC.
The capacities of our equipment range are from 75 to 500 litres, being also possible the simultaneous connection of several systems to obtain higher capacities.
75 Liters
Installation: Wall or floor
110 Liters
Installation: Wall or floor
130 Liters
Installation: Wall or floor
160 Liters
Installation: Floor
180 Liters
Installation: Floor
200 Liters
Installation: Floor
250 Liters
Installation: Floor
300 Liters
Installation: Floor
500 Liters
Installation: Floor
Ciclo de extracción
XL
Potencial nominal ACS (14ºC)*
1543w
Consumo nominal (14ºC)*
516w
SCOP ACS (14ºC)*
2,99
Potencia térmica sistema de apoyo
1500w
Gas refrigerante
R134a
* Datos expresados para una temperatura de calentamiento de 55ºC y temperatura de agua fría de 10ºC según la norma UNE-EN16147
* SCOP según la zona climática
1760 x 550 x 601 mm
Peso del equipo en vacío
107,5Kg
1700 x 25 x 800 mm
6,2Kg
M 3/4 – 3/4 Pulg.
1/4 – 3/8 Pulg.
* A = Alto / B = Profundo / C= Ancho
** M (Entrada y salida de la conexión hidráulica del equipo en conexión macho)
*** Entrada/Salida rosca Sae
Extraction cycle
XL
Nominal power DHW (14ºC)*
1543w
Nominal consumption (14ºC)*
516w
SCOP DHW (14ºC)*
2,99
Heating capacity support system
1500w
Refrigerant gas
R134a
* Data expressed for a heating temperature of 55ºC and cold water temperature of 10ºC according to the UNE-EN16147 standard.
* SCOP according to climate zone
Equipment dimensions (AxBxC)*
1760 x 550 x 601 mm
Equipment empty weight
107,5Kg
Panel dimensions (AxBxC)*
1700 x 25 x 800 mm
Panel weight*
6,2Kg
Hydraulic connections**
M 3/4 – 3/4 inches
Thermodynamic panel connections***
1/4 – 3/8 inches
* A = Height / B = Depth / C= Width
** M (Inlet and outlet of the hydraulic connection of the unit in male connection)
*** Inlet/Outlet Sae thread
Newsletter
Subscribe to our email newsletter to get useful tips and all the latest news.
USEFUL LINKS
DISCOVER Efitherma
CONTACT
NEWSLETTER
Subscribe to our email newsletter to get useful tips and all the latest news.
© EFICIENCIA FUTURO INGENIERIA SL - ALL RIGHTS RESERVED